Working with your builder: a hillside disposal field for a new home near Mangawhai

Builder-ready wastewater design for a new home on a sloping Mangawhai site

With a prefabricated home, the house is built off site while the section is prepared, so the wastewater design can't hold things up. Advance Build, a New Zealand prefabricated and transportable home company, was designing a new three-bedroom home on a 4-hectare rural block west of Mangawhai, and their plans had a strip marked "potential wastewater field" and a note saying the system was to be confirmed. They sent WaterFlow a purchase order on 30 April 2026. Eight days after our site visit, they had a signed, council-ready design that slotted straight into their drawings.

Mangawhai Disposal Field Site Plan Mangawhai Prefab Home Render

The challenge: a long, sloping rural lot with a building programme to keep

The new lot was long and narrow: 4.0079 hectares stretching almost 300 m back from Kaiwaka Mangawhai Road, with the house site near the far end. The ground falls at 6 to 8 degrees to the southwest, and rain runs across it towards the southwestern boundary.

Around the house, the builder had already placed a shed, two 25,000 L water tanks, a driveway and turning area. The open ground left for wastewater was a strip along the western boundary. The disposal field had to fit there, stay 1.5 m off the boundary, and keep the overland rain off it.

And the builder needed it quickly. Their purchase order asked for the site investigation and design report within days, so the consent application could keep moving.

Our approach: a fast site visit and a design drawn to fit the builder's plans

Ken Hoyle was on site on 6 May 2026, working from the builder's own site plan. He bored two holes inside the strip the builder had set aside and found 300 mm of silty loam topsoil over silty loam: a Category 4, moderately draining soil, with no groundwater or mottling to 1.2 m.

Design technician Xandir Fatialofa and Senior Design Engineer Matt Riddell sized the system for five people at 145 L a day each, a design flow of 725 L/day. They specified an EconoTreat 52 Concrete: a 5,200 L dual-chamber septic tank followed by the treatment module, with a pump to send the treated water out to the field. A high-water alarm and 2,120 L of emergency storage give a buffer if the power or pump ever goes down.

Matt signed the design and the producer statement (PS1) for Kaipara District Council on 14 May, eight days after the site visit.

The tricky bit: fitting a dripline disposal field into a narrow strip on a slope

The strip was long and thin, so the field had to be too. Instead of a square block, Matt designed three dripline runs, each 69 m long, laid 1 m apart and close to the contour of the slope. That gives 207 m² of field at a gentle 3.5 L/m² a day, with a 30% reserve strip running right beside it.

On this site the dripline sits on the surface rather than being buried. It is pinned to the ground and covered with at least 100 mm of landscape mulch, which hides it, protects it and holds the moisture where plants can use it.

The other risk was the rain. With overland flow heading across the slope towards the field, the design adds surface water cut-off drains along its edge. They catch rain running down the hill and carry it around the field, so the soil only has to absorb what the dripline gives it.

The result: a council-ready design that dropped straight into the builder's plans

By June, Advance Build's revised site plan carried WaterFlow's design word for word: the 207 m² dripline field, the three 69 m runs, the bore holes, the cut-off drains and the EconoTreat beside the shed. The "to be confirmed" note was gone. The wastewater was no longer a question mark on the builder's programme.

Ken then quoted the full install through the builder: the EconoTreat and dripline field, wastewater drains from the house, 80 m of stormwater drains, an 8 m overflow spreader bar for the water tanks, and mulching the field. Because one design covers the whole system, the builder, the council and the owner all work from the same plan.

What it's like to work with WaterFlow as a builder

"Builders don't want wastewater to be the thing they're waiting on. We walked the site with their plan in hand, so the design fitted around their house, shed and tanks instead of the other way round." — Ken Hoyle, WaterFlow

Project facts: sloping-site wastewater design near Mangawhai

Location

Kaiwaka Mangawhai Road, about 2 km west of Mangawhai, Northland

Property

New 3-bedroom home on a 4.0079 ha rural lot

Engaged by

Advance Build (prefabricated and transportable homes), for the owner

Councils

Kaipara District Council (building consent), Northland Regional Council

System

EconoTreat ET52C: 5,200 L dual-chamber septic tank, treatment module, pumped discharge

Design flow

725 L/day (5 people × 145 L)

Site

Grass, 6–8° slope facing southwest, overland flow to the southwestern boundary

Soil

Category 4: 300 mm silty loam topsoil over silty loam, no groundwater to 1.2 m

Disposal field

207 m² surface-laid PCDI dripline, 3 runs × 69 m, pinned and mulched, 3.5 L/m²/day, 30% reserve

Stormwater

Surface water cut-off drains, 80 m of stormwater drains, 8 m spreader bar

Timeline

Purchase order 30 April 2026, site visit 6 May, design and PS1 signed 14 May

WaterFlow team

Ken Hoyle (site assessment), Matt Riddell (design), Xandir Fatialofa (design)

Building a prefab or transportable home? Get the wastewater design sorted early

Send us your site plan and we'll design a system that fits your plans, with the producer statement your council needs. For a whole-site example, see how one team handled every drop of water on a Mangawhai new build.

Book a site assessment or call 0800 628 356.

WaterFlow NZ Ltd.

Home

Call WaterFlow NZ Ltd.

Call Us

Get a free site assessment

Free Site Assessment